156
Configuring the phone via the Web configurator
Gigaset N300/N300A IP / GBR / A31008-M2214-L101-2-7619 / web-conf.fm / 16.07.13
V
e
rsion 4, 16.0
9
.2005
If several VoIP phones are operated on the same router with NAT, it makes sense to
use randomly selected ports. The phones must then use different ports so that the
router's NAT is only able to forward incoming calls and voice data to one (the
intended) phone. Use the Web configurator to specify a port number range for the
SIP and RTP port that the ports are chosen from.
Making settings for access to Internet services
You can use the following Internet services on your phone.
u
E-mail notifications
In order to use the e-mail function of your base, you have to save the address of
the POP3 server and your personal access data for your mailbox in the base.
You can also specify the time interval at which your phone should check
whether the POP3 server has received new e-mail messages, and specify
whether authentication on the incoming e-mail server should be carried out via
a secure connection.
You make the settings on the Web page:
Settings
¢
u
Customising
info services
On the Gigaset.net server, you can arrange your personal services for your Info
Center
and for the screensaver
Info Services
on the handset. You
can access the Gigaset.net server (URL and personal access data) on the Web
page:
Settings
¢
Info Services
You can also activate the
Info Services
screensaver for your phone.
u
Using net directories
You have to select the provider whose net directories you want to use on the
registered handsets.
You can set the
Display of caller’s name
option, depending on the provider
selected
.
This means that the name of the caller is read from the online directory
for incoming calls and shown on the display (where the handset's local directory
does not contain an entry for the caller's number).
You make the settings on the Web page:
Settings
¢
Online Directory
u
Managing the synchronisation of the base with a time server
By default, your phone is configured so that the date/time is transferred from a
time server on the Internet.
Changes to the settings for the time server and activating/deactivating the syn-
chronisation are done via the Web page:
Settings
¢
Management
¢
Date & Time
