104
Operating the Gigaset N300A IP base answering machine
Gigaset N300/N300A IP / GBR / A31008-M2214-L101-2-7619 / answering_m.fm / 16.07.13
V
e
rsion 4, 16.0
9
.2005
Operating when on the move (remote operation)
You can check and activate your answering machine from any other telephone
(hotel, pay phone etc.).
Prerequisites:
u
You have set a system PIN other than 0000
.
u
The phone you are using for remote operation has tone dialling (DTMF) i.e., you
hear different tones when you press the keys. Alternatively, you can use a code
transmitter (available from retailers).
u
The connection via which you call is assigned to the answering machine as a
receive connection.
Calling the answering machine and playing messages
~
Dial your own number.
9
When you hear your announcement: press
9
.
The announcement is aborted.
~
Enter
system
PIN.
You are informed whether any new messages have been recorded. The messages
are now played back. You can now operate the answering machine with the key-
pad.
You use the following keys:
A
During time stamp playback: Skip to previous message.
During message playback: Skip to the start of the current message.
B
Stop playback. Press again to resume.
After a pause of approx. 60 seconds, the connection is ended.
3
Go to the next message.
D
Repeat the last five seconds of the message.
0
During message playback: Delete current message.
:
Change the status of a previously played back message to "new".
The next message starts to play. The remaining memory is announced
at the end of the last message.
Please note
Remote operation via VoIP connections is possible as long as DTMF signals are
transmitted (depending on the provider) as SIP info messages, audible signals
in the voice channel (inband or audio) or as special RTP data packets (pursuant
to RFC2833).
