165
Customer Service & Assistance
Gigaset N300/N300A IP / GBR / A31008-M2214-L101-2-7619 / appendix.fm / 16.07.13
V
e
rsion 4, 16.0
9
.2005
On the Gigaset N300A IP:
An answering machine reports "PIN is incorrect" during remote operation.
You have entered the wrong system PIN.
¥
Repeat input of system PIN.
An answering machine is not recording any messages/has switched to answer only mode.
Its memory is full.
¥
Delete old messages.
¥
Play back new messages and delete.
An answering machine will not record a call or ends the recording.
1. An error tone sounds and the display shows
Not possible
.
¥
You are making the call via a broadband connection. A recording is not possible in this
case. The attempt by the base to establish a non-broadband connection instead has
failed.
2. The display shows
AM memory full. Delete messages.
The answering machine's memory is full.
¥
Delete messages and then start recording again.
Or:
¥
End the call, delete old messages on the answering machine and then re-establish the
connection.
Exclusion of liability
Some displays may contain pixels (picture elements), which remain activated or
deactivated. As a pixel is made up of three sub-pixels (red, green, blue); it is pos-
sible that pixel colours may vary.
This is completely normal and does not indicate a fault.
