Gigafast PE904-R, User Manual

Page: 28 / 123

GigaFast
Reset to Default – By clicking this it will give you a confirmation on
whether or not the router should be reset back to the factory default
setting. If you have accidentally changed a setting on a router and does
not remember the setting you previously had, then it is suggested that
you click on ‘Reset to Default’ button.
Backup System Setting
– This option allows storing your current
settings by saving it onto your hard-disk. It saves the current settings
on the router to your computer.
Restore System Setting – User can obtain the router settings from here
after the user has saved the information on the router. This option can
load previous settings from the hard-disk.
Old Password/New Password/Confirm Password – This section
allows the user to change the administration password on the router. A
user can change the default password ‘admin’ to a different password
for security reasons. (
Strongly recommended )
Auto Logout, when Idle Time is over: - You can change the amount
of time for the router to take before it automatically logs out itself if
there is an idle occurred.
Chapter3
28