Gigafast PE904-R, User Manual

Page: 13 / 123

GigaFast
•
Computers are to be connected to port 1-3 on the router
(Typically with a straight through cable Cat 5/Cat 5e)
Chapter 2: Quick installs
Overview
The following steps are setup processes for most common broadband
internet service providers.
This section will be divided into three parts. Part one is for
cable
internet setup , part two is for DSL internet setup and part three is for
Macintosh Users .
*Note* the http://192.168.8.1 is the main console page for the PE904-
R. Internet connection is NOT required upon installation of this router.
Any computer that is connected to the router’s port 1-3 is capable of
changing the settings on the router. It does not have to be a designated
port or computer to change the settings of the router.
Before you start
Make sure the internet connection from your ISP is working. Check to
see if there is a connection coming through your ISP (modem) to your
computer. Also, check and see if the lights are properly on when the
router is connected with the computer(s) and the modem.
Chapter2
13