Gigafast PE904-R, User Manual

Page: 24 / 123

GigaFast
The HomePlug Portion will connect directly using the power
adapter that is provided. The Network Password is the same
password that is used with the HomePlug encryption of all
products that are on your Powerline network. By default, the
network password is
“HomePlug” . You can easily change
your Broadband Powerline router network password by click
the
‘Update’ button, after you key in your new network
password. To look for all HomePlug units that are connected
to your network, click the “
Scan Now” button. This will list
(in the provided area) all the HomePlug units that are
connected, including Mac Addresses.
Aftermath
Congratulations, you have just successfully installed the
PE904-R. You should notice after the connection has been
established, the ‘
Broadband Router Status ’ page will display
a list of ‘ WAN IP Addresses ’. This shows that there has been
a connection going through the modem and the router. After
this point, you don’t have use your DSL dial up software no
more on your computer.
*
Note * If no connections were made or the ISP did not
establish a connection to your PE904-R, please refer to our
FAQ page. Thank you.
Chapter2
24