Gigafast PE904-R, User Manual

Page: 22 / 123

GigaFast
below will most likely allow your Macintosh system to
communicate with the PE904-R after the changes have been
made.
Section 2
(For Macintosh OS 8.0 & 9.0 )
1. Boot up your Macintosh computer
2. Make sure all cables are plugged in and all the proper lights
are on
3. Click on the ‘ Apple ’ icon to bring up the menu
4. Click on ‘Control Panel’
5. Then click on ‘ TCP/IP ’
6. Make sure Ethernet is selected where it says ‘ Connect as ’ and
change the configuration to ‘ DHCP ’
7. Leave the ‘ DHCP Client ID ’ blank and close it
8. Make sure click Save button at the end
9. Please restart your Macintosh system for the changes to take
effect
10. After the Mac is up and running, open up your web browser
and type in this address: ‘
http://192.168.8.1 ’ and follow the
instructions under Part 1 and Part 2 to continue the
installation.
Section 3
(For Macintosh OS X or 10.00 )
1. Boot up your Macintosh computer
2. Make sure all cables are plugged in and all the proper lights
are on
3. Click on the ‘ Apple ’ icon
4. Go to ‘ System Preference ’
5. Click on ‘ Network ’ and choose ‘ New Location ’
6. Select your Ethernet card under the first configuration box
Chapter2
22