- 2 -
Thank you for purchasing the GGM product.
Before
use
this
product,
read
well
the
manual
certainly
and
understand all about
knowledge, safety information and cautions of
product, and use right way. After read, please be sure to keep fixed
place to refer anytime.
1.
1.
1.
1.
Confirmation at product arrival
Confirmation at product arrival
Confirmation at product arrival
Confirmation at product arrival
- Confirm whether product is same with order.
- If another product is installed, there is danger of injury or fire hazard.
- Products are protected in Shock Protection paper packaging, and there are the following items.
Please confirm whether there are all of the things correctly as followings;
1) CONTROLLER --------------------------- 1 unit
2) SOCKET (11PIN) --------------------------1 unit
3) External speed setter-----------------------1 unit
4) Manual(this booklet) ----------------------1 copy
2. Precautions
2. Precautions
2. Precautions
2. Precautions
Caution for installation
1. Use in the places where ambient temperature range is -10
~ +50
and humidity is
85% or less. Also, avoid the place where reaches direct ray of light, and should install
COVER etc. when use above places.
2. Avoid the places where there are a lot of dusts, vibraci ns, and ocorring flammable
GASes, corrosive GASes.
Caution for Wiring
1. Use SOCKET for connection and do not solder directly to PIN of main body.
2. Confirm well termiknal numbers in case of SOCKET connection.
Also, when insert CONTROL PACK to SOCKET, turn OFF power and insert after confirm
PIN number.
3. Large output MOTOR, solenoids, high-frequency power, electric welding, etc. may cause
malfunction of CONTROL PACK. Wire separating from CABLE of the main circuit of above
devices by power of separate circuit.
In NOISE Section, prevent malfunction referring Clause 5(unit wiring diagram).
4. Wire in the shortest distance installing MOTOR and CONTROL PACK
as near as possible
