- 18 -
9. Basic Electrical Wiring (Parallel operation)
9. Basic Electrical Wiring (Parallel operation)
9. Basic Electrical Wiring (Parallel operation)
9. Basic Electrical Wiring (Parallel operation)
As like the following wiring diagrams, high power GSA TYPE is multiplepossible Parallel
operation that can set speed control setting MOTORs at the same time same speed by one
variable resistor for speed setter.
As like the above diagrams, wire Power Supply(Terminal number
,
) and Controls
(Terminal number
,
) in each equal line.
Even in case combination of other MOTOR and CONTROL PACK, can do parallel operation
equalizing Power Suppl and Controls.
CAUTION
1.For Power supply and control unit, lay wiring as same PIN number respectively.
2. The capacity of the speed control variable resistor can obtain as following.
VRx=20/N K , N/4 W (N : quantity of MOTORs)
ex.)in case MOTOR is 2 units it is 10K
1/2W
3. Each MOTOR rates almost the same speed, but will cause some errors by difference of
load and variation of the product.
To prevent such a phenomenon, prepare variable resistor for fine control (SVR)to terminal
number
about 5-10% resistivity of variable resistor (VRx) for speed setting, Capacity 1/4W.
