GF Signet 0252, Operating Instructions Manual

Page: 8 / 24

Application settings:
Factory Set 2551 & 2552
1 Flow Units m m, ft, m
3
, L, ft
3
, US Gal, Imp. Gal, Acre in.
2 Time Base sec Sec, Min, Hour, Day
3 Pipe ID (Inside Diameter) * 44.0 0 - 5000
4 Pipe ID Units mm mm, in.
5 K-Factor Units Pulses / Liter Pulses / Liter, Pulses / Gallon
6 K-Factor * 65.76670
0.000100 - 999999.1
See Magmeter manual.
Available at
www.gfps.com
7 Averaging (in seconds) 14
1
/
10
, ¼, ½, 1, 1½, 3, 7, 14, 25, 50, 100
8 Sensitivity (%) 25 100, 50, 30, 25, 20, 15, 10, 8, 5, 2
9 Noise Rejection (Hz) 60 50 or 60
10 Low Flow Cut Off (% of full scale) 0 0 to 20% Full Scale
Loop Output settings:
11
4 mA Set Point (Flow Units / Time Base) 0.00000
0.00000 - 999999.00000
12 20 mA Set Point (Flow Units / Time Base) 5.00000
Write or Save settings:
13a
or
13b
Click “Write” to copy these settings to the product.
Click “Save” to save these settings to a local computer file for later use.
14
To use a saved file (from 13b):
1. Click “Load”
2. Navigate to the saved file
3. Select “Open”
4. Click “Write”
5. Click “Read” to confirm
2551 & 2552 Operation
* NOTE : A proper re-span of the 4 to 20 mA Loop will also require the correct internal pipe ID and K-factor, as both are used to find the
effective velocity of the pipe.
8
GF 0252 Configuration Tool