GF Signet 0252, Operating Instructions Manual

Page: 10 / 24

258X Operation
Application settings:
1 Flow Units of Measure
2 Total Units of Measure
3 K-Factor - Click Read to Update
4 Averaging
5 Sensitivity (%)
6 Low Flow Cut Off
7 Positivity Flow Direction
Loop Output settings:
8 4 mA Set Point (Flow Units / Time Base)
9 20 mA Set Point (Flow Units / Time Base)
10 Error Current Output Selection
11 Click 4 mA Adjust button to change the 4 mA current
12 Click 20 mA Adjust button to change the 20 mA current
13
Select Output modes, 4 to 20 mA as either Active or Passive, S³L or Frequency output. Note: Setting the 258X to frequency will prevent
the use of the 0252 tool. You will need to change the 258X back to S³L using the Android or iOS app before using the 0252 software.
Information :
14
Serial Number
15 Part Number
16
Order Number
17 Body Material
18
Body Size
19 Permanent Totalizer - Click Read to Update
20
Resettable Totalizer - Click Read to Update
21 Reset Resettable Totalizer to Zero
22
Bluetooth Device Tag
23 Bluetooth Passkey
24 Click to Save or Cancel Bluetooth Device Tag and Passkey Update
1
2
3
4
5
6
7
10
GF 0252 Configuration Tool