GF Signet 0252, Operating Instructions Manual

Page: 18 / 24

2751 Calibration
1 2
3
4
Calibration settings:
1 pH/ORP Tab - Click to perform pH Calibration
2 Temperature Tab - Click to perform Temperature Calibration (pH)
Calibration pH settings:
3 Start Calibration - Click to start pH/ORP Calibration
4 Reset Calibration - Click to reset calibration to Factory Default
pH Calibration settings:
5 Wait for reading to stabilize then click Continue
6 To cancel calibration click Cancel and return to Calibration Screen
7 Enter pH/ORP Value
8 Click Next for two point calibration
9 Click End to complete one point calibration
10 To cancel calibration click Cancel and return to Calibration Screen
Temperature Calibration settings:
11 Start Calibration - Click to start Temperature Calibration (pH)
12 Reset Calibration - Click to reset calibration to Factory Default (pH)
Calibration Temperature settings:
13
Wait for reading to stabilize then Click Continue (pH)
14 To cancel calibration click Cancel and return to Calibration Screen (pH)
15
Enter Temperature Value
16 Click End to complete Temperature Calibration (pH)
17
To cancel calibration click Cancel and return to Calibration Screen (pH)
18
GF 0252 Configuration Tool