Gewiss GWJ3101A, User And Installation Manual

Page: 62 / 260

Electric vehicle charging unit JOINON WALLBOX I-CON DLM
62
The charging station has a clean contact that can be used by external devices to check the charging station,
intervening in the current charging process.
The operating logic is combined with the position of selector number 4 of the DIPSWITCH on the electronic board.
12.1 DEFAULT SETTING
The default setting for selector n. 4 of the DIPSWITCH is OFF
12.1.1 OPERATING LOGIC
With the selector in this position, the operating logic is
ENABLING CONTACT VEHICLE CHARGING MANAGEMENT
Open
Charging enabled without external limitations.
The logics of the ECO or DLM mode are actuated
depending on how the charging station is set
Closed
Charging blocked or suspended
Charging is blocked if the signal arrives when the
station is in standby
Charging is suspended if the signal arrives when
the station is charging
12.2
ADDITIONAL SETTING
It is possible to change the position. The default setting for selector n. 4 of the DIPSWITCH is OFF
12.2.1 OPERATING LOGIC
With the selector in this position, the operating logic is
ENABLING CONTACT VEHICLE CHARGING MANAGEMENT
Open
Charging blocked or suspended
Charging is blocked if the signal arrives when the
station is in standby
Charging is suspended if the signal arrives when
the station is charging
Closed
Charging enabled without external limitations.
The logics of the ECO or DLM mode are actuated
depending on how the charging station is set
CLEAN CONTACT CONNECTION
12.
COLLEGAMENTO
UTENTE
USER CONNECTION