Gericom SuperSonic Force 17120-M660SU, User Manual

Page: 34 / 220

1 - 14 System Map: Left View
Quick Start Guide
1
System Map: Left View
1
5
2
4 6 3 7
Changing DVD Regional Codes
Go to the Control Panel and double-click Device Manager
(Hardware and Sound) , then click the + next to DVD/CD-
ROM drives . Double-click on the DVD-ROM device to bring
up the Properties dialogue box, and select the DVD Region
(tab) to bring up the control panel to allow you to adjust the
regional code (see
“DVD Regional Codes” on page 2 - 5 ).
DVD region detection is device dependent, not OS-depen-
dent. You can select your module’s region code
5 times. The
fifth selection is permanent. This cannot be altered even if
you change your operating system or you use the module in
another computer.
CD Emergency Eject
If you need to manually eject a CD/DVD (e.g. due to an
unexpected power interruption) you may push the end
of a straightened paper clip into the emergency eject
hole. Do not use a sharpened pencil or similar object
that may break and become lodged in the hole.
Media Warning
Don’t try to remove a floppy disk/CD/DVD while the sys-
tem is accessing it. This may cause the system to
“crash”.
Figure 1 - 6 - Left View
1. Security Lock Slot
2. Optical Device Drive Bay
(see page
2 - 3 )
3. RJ-11 Modem Jack
4. S/PDIF-Out Jack
5. Microphone-In Jack
6. Headphone-Out Jack
7. Recording Line-In Jack (see page A - 2 )
1
2
5 4 6 3 7
Models A & B
Model C