Gericom SilverSeraph CL10, User Manual

Page: 129 / 150

129
Your data files are damaged or corrupted
Refer to your software documentation for file recovery procedures.
Many software packages automatically create backup files.
You may also be able to recover lost data using utility software,
which is available from your dealer.
Some programs run correctly but others do not
This may be a software configuration problem. If a program does
not run properly, review the program’s hardware configuration
requirements. Most software documentation lists the minimum
hardware requirements. See “Features and Specifications” to review
the hardware configuration of this computer.
A disk will not go into the diskette drive
You may already have a diskette in the drive. Make sure the drive
is empty.
You may be inserting the diskette incorrectly. Hold the label of the
disk with the hub side facing down, and insert it so that the metal
head window cover goes into the drive first.
The metal cover or a loose label may be obstructing the path into
the drive. Carefully inspect the diskette. If the metal cover is loose,
replace the diskette. If the label is loose, replace the label and try
inserting the diskette again.
The computer displays the Non-system disk or disk
error message
If you are starting the computer from the hard disk make sure
there is no diskette in the diskette drive.
If you are starting the computer from a diskette, the diskette in the
drive does not have the files necessary to start the computer.
Replace it with a bootable diskette.