Gericom SilverSeraph CL10, User Manual, Page: 13 / 150

13
Number to be dialed: 0 1 2 3 4 5 6 7 8 9
Number to program into computer: 0 9 8 7 6 5 4 3 2 1
Note that where DTMF dialing is used, the numbers should be
entered normally.
• The transmit level from this device is set at a fixed level and
because of this there may be circumstances where the
performance is less than optimal. Before reporting such
occurrences as faults, please check the line with a standard
Telepermitted telephone, and only report a fault if the phone
performance is impaired.
• It is recommended that this equipment be disconnected from
the Telecom line during electrical storms.
• When relocating the equipment, always disconnect the Telecom
line connection before the power connection, and reconnect the
power first.
• This equipment may not be compatible with Telecom Distinctive
Alert cadences and services such as Fax Ability.
(NOTE THAT FAULT CALLOUTS CAUSED BY ANY OF THE
ABOVE CAUSES MAY INCUR A CHARGE FROM TELECOM)
General conditions
As required by PTC 100, please ensure that this office is advised
of any changes to the specifications of these products, which
might affect compliance with the relevant PTC Specifications.
The grant of this Telepermit is specific to the above products with
the marketing description as stated on the Telepermit label artwork.
The Telepermit may not be assigned to other parties or other
products without Telecom approval.
A Telepermit artwork for each device is included from which you
may prepare any number of Telepermit labels subject to the general
instructions on format, size and color on the attached sheet.