Gericom SilverSeraph CL10, User Manual

Page: 10 / 150

10
Notes for Users in Australia & New
Zealand
Modem warning notice for Australia
Modems connected to the Australian telecom network must have
a valid Austell permit. This modem has been designed to
specifically configure to ensure compliance with Austell standards
when the country selection is set to Australia. The use of other
country setting while the modem is attached to the Australian
PSTN would result in you modem being operated in a non-
compliant manner. To verify that the country is correctly set,
enter the command ATI9 that displays the currently active setting.
To set the country permanently to Australia, enter the following:
AT%TE=1
ATS133=1
AT&F
AT&W
AT%TE=0
ATZ
Failure to set the modem to the Australia country setting as shown
above will result in the modem being operated in a non-compliant
manner. Consequently, there would be no permit in force for
this equipment and the Telecom Act 1991 prescribes a penalty
of $12,000 for the connection of non-permitted equipment.