Gericom SilverSeraph CL10, User Manual

Page: 39 / 150

39
The HDD LED flashes blue when the system is accessing the
hard disk drive.
CAUTION: Never turn off the computer while any of
the drives are in use. It may cause the data loss and
possible damage the drive.
The Modular Bay LED flashes when the system is accessing a
drive installed in the Modular Bay. The icon indicates either an
optical disc (CD-ROM, DVD-ROM, CD-RW, multifunction DVD-
ROM/CD-RW) or floppy disk.
The CD/MP3 switch sets which audio playback mode to use, either
audio CD or MP3. It is spring-loaded switch and returns to the
center position after you actuate it. Set modes as follows:
• CD Mode Slide the switch button to the left to set the system
in CD mode.
Computer Power Off state : You can use the CD controls to
play an audio CD without turning on the computer.
Computer Power On state : Pushing the switch starts the
Windows Media Player which will play an audio CD you have
loaded in an optical drive in the Device Bay.
• Digital Mode Slide the switch button to the right to set the system
in MP3 mode.
M P 3
3. It lights blue and blinking (LED on 1 second every 4 second)
when the battery capacity is below 10%.
4. It lights blue and blinking (LED on 1 second every 2 second)
when the battery capacity reaches 3%.
The DC-IN LED lights blue when the computer is connected to the
AC adapter and it is plugged into an AC power source.