75
Hot swapping
With PC Cards, you can replace one PC Card with another while
the computer is on. This is called “hot swapping.”
Hot swapping precautions
Although you can insert a PC Card at any time, to avoid data loss
do not remove a card while it is in use. Before removing a PC
Card, stop it by clicking the PC Card (PCMCIA) icon on the taskbar.
After the PC Card is stopped, it is safe to remove it.
• Don’t remove a hard disk card while the system is accessing it.
• Don’t remove a network card while you are connected to a
network.
PC Card Slots
CAUTION: If your PC Card supports hot swapping, you
can remove it at any time. However, to avoid data loss,
never remove a card while it is in use. For more infor-
mation, see “Hot swapping”.
4.
Press the eject button again to eject the PC Card. The upper
eject button will eject Type II PC Card from the upper slot. The
lower button will eject a Type II, or Type III card from the
lower slot.
5.
Remove the PC Card and store it properly.
PC Card Eject Button
Summary of Contents for SilverSeraph CL10
Page 1: ...User s Manual User s Manual...
Page 140: ...140 AppendixA...
Page 142: ...142 AppendixB...
Page 149: ...149 AppendixC...
