Gericom SilverSeraph CL10 Page 53 User Manual Download

Page: 53 / 150

Connecting An Alternate Pointing
Device

You may want to use an external mouse or trackball instead of the
computer’s built-in Touch Pad pointing device. Your computer
supports USB-compatible pointing devices.

The Touch Pad remains operable, even if you connect a millenary
pointing device to the computer.

Using a USB Pointing Device

Plug the USB pointing device cable into one of the USB ports.

We recommend the USB port on the right-side of the computer.
For left-handded user’s, use one of the rear USB ports.

Refer to your device documentation for configuration steps.

NOTE: In Windows

Millennium Edition, the green ques-

tion mark is displayed on USB Universal Host Control-
ler-2485/2484/2487, the reason is the newer USB con-
troller was unknown at the time Windows

Millennium

Edition was release, the USB function no any loss.

USB Ports

USB Port

Summary of Contents for SilverSeraph CL10























































































































































Search results

Summary of Contents for SilverSeraph CL10

Reviews:

Related manuals for SilverSeraph CL10

Brands by name

Popular brands

Gericom SilverSeraph CL10, User Manual

Search results

Summary of Contents for SilverSeraph CL10

Reviews:

Related manuals for SilverSeraph CL10

Brands by name

Popular brands