Gericom Phantom G331, User Manual

Page: 11 / 77

3
•
The 5GHz Turbo mode feature is not allowed for operation in any
European Community country
•
This device must not be operated in ad-hoc mode using channels in
the 5GHz bands in the European Community. Ad-hoc mode provides
a direct communication between two client devices without a
Wireless LAN Access Point.
This device must be used with Access Points that have employed and
activated a radar detection feature required for European Community
operation in the 5GHz bands. This device will operate under the control
of the Access Point in order to avoid operating on a channel occupied by
any radar system in the area. The presence of nearby radar operation may
result in temporary interruption in communications of this device. The
Access Point’s radar
You may consult with the local technical support staff responsible for the
wireless network to ensure the Access Point device(s) are properly
configured for European Community operation.
Safety Precautions
This section is designed to assist you in identifying potentially unsafe
conditions while working with this product. Required safety features have
been installed in the computer to protect you from injury. However, you
should use good judgment to identify potential safety hazards:
1.
Please read these safety instructions carefully.
2.
Please keep this User's Manual for later reference.
3.
Please disconnect this equipment from AC outlet before cleaning.
Don't use liquid or sprayed detergent for cleaning. Use moisture
sheet or cloth for cleaning.
4.
For pluggable equipment, that the socket-outlet shall be installed
near the equipment and shall be easily accessible.
5.
Please keep this equipment from humidity.
6.
Lay this equipment on a reliable surface when installed. A drop or
fall could cause injury.
7.
Make sure to use the right voltage for the power source when
connecting the equipment to the power outlet.
8.
Place the power cord in such a way that people can not step on it.
Do not place anything on top of the power cord.
9.
All cautions and warnings on the equipment should be noted.
10.
If the equipment is not use for a long time, disconnect the equipment
from the main power outlet to avoid being damaged by transient
overvoltage.