Gericom Phantom G331, User Manual, Page: 12 / 77

4
11.
Never pour any liquid into the opening, this could cause fire or
electrical shock.
12.
Never open the equipment. For safety reason, the equipment should
only be opened by a qualified service personnel.
13.
If on the following situations arises, get the equipment checked by a
service personnel:
a.
The Power cord or plug is damaged.
b.
Liquid has penetrated into the equipment.
c.
The equipment has been exposed to moisture.
d.
The equipment has not worked well or you cannot get it work
according to the user's manual.
e.
The equipment has dropped and damaged.
f.
If the equipment has obvious sign of breakage.
14.
Do not leave this equipment in an environment unconditioned,
storage temperature above 60
°
C (140
°
f), it may damage the
equipment.
15.
The unit can be operated at an ambient temperature of max. 35
°
C.
16.
The sound pressure level at the operators position according to IEC
704-1: 1982 is equal or less than 70 dB(A).
17.
Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor, whether
it is 100-120 or 200-240 Vac. The following information explains
the requirements for power cord set selection.
¾ The cord set must be approved for the country in which
it is used.
¾ The appliance coupler must have a configuration for
mating with a CEE22/EN6032/IEC 320 appliance inlet.
A.
For U.S. and Canada:
¾ The cord set must be UL Listed and CSA Certified.
¾
The minimum specifications for the flexible cord are
No. 18 AWG.
B.
For Japan:
¾ All components of the cord set must bear a “PSE” or
“ T ” mark and registration number in accordance with
the Japanese Dentori Law.
¾ The minimum specifications for the flexible cord
are .75m
㎡
conductors.
C.
For Other Countries: