Gerber P2C™ 1600 Cutters
User’s Manual
General Information
1-6
1.2.3 KNIFE, PEN, AND POUNCING TOOL
The Gerber P2C cutters are supplied with two standard knife blades (for vinyl
media) and a black fibre tip pen.
Tool
Medium
Quantity
Standard knife
(requires a standard knife holder)
Standard, reflective
& fluorescent vinyl
2 off
Sandblast knife
Sandblast & thick
material
optional
Pouncing tool
Paper
optional
Pen
Color
Quantity
Fibre tip pen
Black
1 off
TABLE 1-3:
GERBER P2C 1600 KNIVES, PENS, AND POUNCING TOOLS
To order replacement knives, pens, and/or pouncing tools, contact your local
dealer, quoting the part numbers listed in table 1-9.
The Gerber P2C cutters will only perform according to specifications if a
genuine Gerber knife, pen or pouncing tool is installed. Do not replace the
standard knife, pen or pouncing tool with products from other manufacturers.
1.2.4 INTERFACE
Communication
USB ver 1.1, standard asynchronous RS-
232-C and Centronics parallel interface
USB : I/O Port connector
USB series “B” receptacle
Mating connector
USB series “B” plug
Serial : I/O Port connector
DB-9P
Mating connector
DB-9S
Byte format
8 data bits, 2 stop bits, no parity
Baud rate
38400, 19200, 9600, 4800, 2400 bps
Parallel: I/O Port connector
Centronics female
Mating connector
Centronics male
TABLE 1-4:
GERBER P2C 1600 INTERFACE SPECIFICATIONS
