Gerber P2C™ 1600 Cutters
User’s Manual
General Information
1-28
80099:;
,/01 -
!<=99
'(4*($ ,
!!!
!
!!
!
The cutter has been selected by the computer.
However, if you pressed
, the default media length is displayed:
An XXXX-value appears. (2000mm is the default value.) The default values can
be changed by pressing the
(+10),
(-10),
(-100), and
(+100)
jogging keys.
Press
to confirm the length, and the cutter will start shuffling the vinyl in
order to set a track on the vinyl.
80099:;
,/01 -
!<=99
'(4*($ ,
!!!
!
!!
!
The cutter is now ready to receive a file.
80099:;
,/01 -
!<=99
'(4*($ ,
!!!
!
!!
!
The cutter has been selected by the computer.
When the built-in media sensors detect the end of the roll, the message
END OF MEDIA
will be displayed. The display will show the actual length of
the loaded media.
If that length is sufficient, press
1
to
ACCEPT
.
If not, press
2
to
ABORT
and the media will automatically return to its
origin.
CAUTION
When you accept the loaded area in sheet mode, the cutter will clip the
sign to be cut in case of insufficient media. Compare the loaded media
with the area needed for the sign!
