Gerber P2C™ 1600 Cutters
User’s Manual
General Information
1-17
FIGURE 1-5
BLADE LENGTH ADJUSTMENT
4.
Turn the cutting depth adjustment screw clockwise to increase the cutting
depth. Turning the screw counterclockwise will decrease the cutting
depth.
FIGURE 1-6
SETTING KNIFE DEPTH
5.
To install the knife into the tool carriage:
-
Loosen the clamp screw (2) and place the knife holder in the clamp
(1). Be sure that the knife holder is completely seated in the clamp.
- Tighten the clamp screw.
6.
Set the knife pressure as follows:
