Administrator
81
4
4.2.17 Factory Default
The Factory Default setting can be found under this path:
System> Factory Default
.
Users can follow the instructions on this page to reset the IP Camera to factory default
settings if needed.
Figure 4-26
Load Default
Click on the <Full Restore> button to recall the factory default settings. Then the system will
restart in 30 seconds.
NOTE:
The IP address will be restored to default.
Partial Restoration
Click on the <Partial Restore> button to recall the factory default settings but keep the
current settings in
System>Network
. Then the system will restart in 30 seconds.
Reboot
Click on the <Reboot> button, and the system will restart without changing current settings.