Administrator
55
4
If you select <Get IP address automatically>, after the IP Camera restarts, you can
search it through GV-IP Device Utility.
NOTE:
Make the record of the IP Camera’s MAC address, which can be
found in the label of the camera, for identification in the future.
•
Use fixed IP address
To set up static IP address, select <Use fixed IP address> and move the cursor to the
IP address blank and insert the new IP address, ex. 192.168.7.123; then go to the
Default gateway (explained later) blank and change the setting, ex. 192.168.7.254.
Press <Save> to confirm the new setting.
When using static IP address to login to the IP Camera, users can access it either
through GV-IP Device Utility or type the IP address in the URL bar and click on <Enter>.
¾
IP address
This is necessary for network identification.
¾
Subnet mask
It is used to determine if the destination is in the same subnet. The default value
is “255.255.255.0”.
¾
Default gateway
This is the gateway used to forward frames to destinations in different subnet.
Invalid gateway setting will fail the transmission to destinations in different
subnet.
¾
Primary DNS
Primary DNS is the primary domain name server that translates hostnames into
IP addresses.
¾
Secondary DNS
Secondary DNS is a secondary domain name server that backups the primary
DNS.
Use PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields, and click on
the <Save> button to complete the setting.