96
4.4.2 Cruise
The Cruise Programming can be found under this path:
PTZ > Cruise
.
The IP Camera supports up to eight Cruise Paths. Follow the instructions below for Cruise
Path setup.
Figure 4-37
Cruise Setting
To set up a Cruise Path, first select a path number from the drop-down list. Then move the
cursor to the live view pane, and move the camera to a desired view (PTZ controls) as the
start point of a Cruise Path. Click on the <Set> button of <Record Start> and start
programming the Cruise Path via PTZ controls. When finishing programming, click on the
<Set> button of <Record End> to quit. The Cruise Path will be automatically recorded.
Cruise Run
Select the specified Cruise Path from the drop-down list, click on the <Run> button, and then
the camera will start touring around as recorded.
To view the camera touring around in full screen mode, move the cursor onto the live view
pane, right-click and left-click to select “fullscreen”. Then users can view the camera
navigation in full screen.