Installing the GV-IP Speed Dome
19
2
6. Loosen the three screws counterclockwise on the In-Ceiling (T-Bar) Mount until the
wings are loose enough to be turned outward from the ring. (as shown in the second
diagram)
Figure 2-14
7. Put the T-Bar Bracket into the ceiling opening and fix the In-Ceiling (T-Bar) Mount on
the ceiling by tightening three screws clockwise.
Figure 2-15
8. As you tighten the screws, the Wings will approach the ceiling board until it is
completely clinched into the board.
Figure 2-16
NOTE:
Make sure the Wings of the T-Bar Bracket completely clinched into the
ceiling board.