64
•
Alarm Type
Select an alarm type, <Normal close> or <Normal open>, that corresponds with the
alarm application.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take at an alarm occurrence. All options
are listed as follows:
•
Enable Alarm Output 1/2
Select these items to enable alarm relay outputs.
•
Send Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by FTP and/or E-Mail
when an alarm is triggered.
•
Upload Image by FTP
Select this item and the Administrator can assign a FTP site and configure various
parameters. When the alarm is triggered, event images will be uploaded to the
appointed FTP site.
•
Upload Image by E-Mail
Select this item and the Administrator can assign an e-mail address and configure
various parameters. When the alarm is triggered, event images will be sent to the
appointed e-mail address.
NOTE:
Make sure SMTP or FTP configuration has been completed. Refer to
section
and
FTP
for further details.
•
PTZ Function
Assign a camera function: Preset, Sequence, Auto Pan or Cruise, and specify a Preset
Point / Sequence Line / Auto Pan Path / Cruise Line for the camera to perform at an
alarm occurrence.
NOTE:
Refer to the sections through
Preset
to
Sequence
for details of
Preset Point / Cruise Line / Auto Pan Path / Sequence Line setups.
If the selected function is <Preset>, it is required to enter its dwell time (1 ~ 256 sec.) in
the corresponding field as shown below. When the alarm is triggered, the camera will
go to the selected Preset Point and stay there for a user-defined period of time. As for