Installing the GV-IP Speed Dome
21
2
2.1.3 Straight
Tube
Mount
The Straight Tube is available in different length: 25 cm and 50 cm.
Ceiling Mounting: Straight Tube
GV-MountD100 / GV-MountD101
(Optional Accessory)
GV-MountD901: for indoor GV-SD200, optional accessory
GV-MountD902: for outdoor GV-SD200, supplied
Figure 2-20
Follow the steps:
1. Ensure that the ceiling can support the weight of the Dome Camera and Straight Tube.
2. Make a cable entry hole on the ceiling.
3. Fix the suspension bracket to the ceiling with proper screws and screw anchors.
4. Thread the cables through the Straight Tube and the Mounting kit.
NOTE:
After threading the cables, block the cable entry hole with the supplied
sponge(s) to prevent insects from entering the tube.
5. Fix the Mounting Kit to the Straight Tube with the supplied screws and washers.
6. Connect the cables to the Dome Camera.
7. Mount the Dome Camera to the Mounting Kit. (Ensure the Dome Camera is fixed
completely, and the thread holes on the Lock Screw Plate and Mounting Kit are aligned).
Afterwards, screw the supplied M5 standard screw, as shown in the picture.
Figure 2-21