128
5. To move the camera to a preset point, click the
Option
button, select
Preset Go
, select
1~16
and select a preset number.
6. To adjust the Pan or the zoom speed, click the
Option
button and click
Setup
.
Figure 6-9
7. Use the drop-down list to adjust the pan / tilt speed and the zoom speed.
Note:
1. For firmware V1.0, the preset points must be configured on the Web interface of GV-
IP Speed Dome. Refer to
4.4.1 Preset
for details. Up to 16 preset points are
supported on GV-System PTZ Control Panel.
2. The preset points will be indicated by the preset number.
The names of the preset
points specified in the Web interface of the Speed Dome will not be displayed on the
GV-System PTZ Control Panel.