Administrator
95
4
4.4.1 Preset
The Preset Programming can be found under this path:
PTZ > Preset
.
Up to 256 Preset Points can be programmed for the IP Camera. Please refer to the
instructions below to set a Preset Point.
Figure 4-36
Preset Setting
To set up a Preset Point, first move the cursor to the live view pane. Then left click and drag
the red pointer with PTZ controls to a desired position and adjust the fine zoom/ focus ratio.
Subsequently, assign a number for the current position from the drop-down Number List
(click on <PrePage> or <NextPage> button to reach number 1 to 256), and enter its
descriptive name. Click on the button <Set> to save the settings mentioned above.
Preset Go
To have the camera move to a specified Preset position, please select the Preset Point from
the drop-down Preset list (click on <PrePage> or <NextPage> button to reach preset number
1 to 256). Then the camera shall readily move to the target position.