6.1.1 Customizing Camera Settings
After the GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R / GV-LPC1100 is
connected and assigned with a display channel, you can configure the camera’s settings such
as frame rate, codec type and resolution. Right-click the camera to see the following list of
options:
Figure 6-6
Change Setting:
Changes the IP address, port number, username and password of the
camera. This function is only available when the camera is disconnected.
Change Resolution:
Changes the display ratio, live view resolution and record
resolution.
Remote camera setting:
Accesses the configuration interface of the connected camera.
Network Time Out:
When network disconnection exceeds the specified time period, the
camera status will be displayed as Connection Lost.
On Demand Display:
Enables automatic adjustment of live view resolution and produces
good image quality without causing high CPU usage.
Change live view codec:
Changes the live view codec.
Change record codec:
Changes the recording codec.
Live view decode postpone time:
Specifies the number of milliseconds to postpone live
view decoding. When network connection with the camera is unstable or when the time
length between frames is not evenly distributed, postponing the live view decoding will
make the video smoother
.
Frames to keep in live view buffer:
Specifies the number of frames to keep in the live
view buffer.
Recording Codec Format:
Specifies whether to record in standard or GeoVision type of
JPEG, H.264 codec.
110
