74
3.5.5.6 Push Notification
The
Push Notification
function allows users to send the captured license along with RFID tag
data to a desired JSON server or Controllers via GV-FWC for license plate + RFID tag access
management.
Note:
For sending the captured license data along with RFID tag numbers, the camera
must be connected to a GV-RU9003, see
1.6.2.2 UHF RFID Reader Connection
.
To set up LPR + RFID tag access management, follow the steps below:
Step 1: Connect to GV-RU9003 and Enable RS-485-B
See
1.6.2.2 UHF RFID Reader Connection
and
3.5.5.3 GPS & RS-485
.
Step 2: Connect to GV-FWC via LAN
A. On the Push Notification page, select
Enable,
select
Push Card Code to AS
Controller
from the Notification type dropdown list.
B. Type the IP address of the GV-FWC in
URL
Step 3: Connect the GV-FWC to GV-AS Controller via LAN or to 3
rd
-Party Controller
via Wiegand
See
3.3 Receiving Access Card Data by Controller
Sending Access Data to JSON Server
To send access card data to a desired JSON server, select
HTTP – POST
from the
Notification type dropdown list and type its URL along with its port value within
URL
.