Introduction
9
1
1.3.4 Disconnecting Built-in IR Lights and Connecting to External
IR Lights
Follow the steps below to connect to any user-supplied external IR lights in place of the
camera’s built-in IR lights:
1. First, turn off the camera.
2. Disconnect
Built-in IR Light Wiring
(see No. 1,
1.3.3 Overview & Wiring
).
3. Then connect it to
External IR Wiring Pin
(see No. 2,
1.3.3 Overview & Wiring
), as
illustrated below.
4. Connect the user-supplied external IR lights to
DO2 [External IR Light Wiring]
(see No.
18
—
Brown wire,
1.3.3 Overview & Wiring
) of the camera.
Note:
For IR light to work, both internal and external, make sure
Digital Output 2
is
enabled to control the IR light, see
3.5.2 Output Settings
.