Administrator Mode
67
3
Parking (I/O) 2/3:
This option is designed for parking areas. The recognition is
activated by input triggers and records only the first vehicle entry, while ignoring others,
within its detection and recognition range. Select which input(s) will trigger recognition,
as mentioned in the
2. Advanced
section below.
Scene Mode:
Select the speed of the recognition targets, from
Under 60 km/h
or
Over
60 km/h
.
[1. Basic]
Sets the minimum and maximum height of the license plates to be detected and the
area of detection.
1. Select
Min. Height of License Plate: (40~400)
and click and drag on the image to
define the minimum height of the license plates to be detected, from 40 to 400 pixels.
2. Select
Max. Height of License Plate: (40~400)
and click and drag on the image to
define the maximum height of the license plates to be detected, from 40 to 400 pixels.
3. Select
ROI (detection area)
and click and drag on the image to draw the desired
areas for license plate detection. Up to 8 ROIs can be defined.
4. Click
Apply
.
[2. Advanced]
Sets the parameters for license plate detection.
If the recognition is still repeating, it will notify after X seconds (0~300):
Specify the
amount of time recognition is activated for upon motion detection or input trigger events.
Parking Mode (Controlled by ASM, SD storage is necessary):
Performs license plate
recognition only when the inputs at a GV-ASManager-controlled parking lot are triggered.
Output recognition result quickly (It will increase error rate of recognition system):
Select this option if you want to have a faster recognition result at the cost of accuracy.
This option is suitable for a large amount of traffic and the frames received will go through
a faster recognition process (approximately at a processing rate of 1 frame per second).
Detected Sensitivity:
Select the sensitivity level of motion detection from the dropdown
list, from 1 to 10. The higher the value, the more sensitive the system is to the motion.
Detected Object Size:
Select the value of the targeted object’s normal size, from 1 to 5.
The higher the value, the bigger the size of the object.
Trigger Input:
Select to trigger
Input 1
or
Input 2
.
Force Export (Used in I/O Mode):
Select to display the symbol ****** to represent
unknown license plates even when the recognition fails. If the option is not selected,
invalid (failed) recognition results will not be recorded.