manualshive.com logo in svg

GeoVision GV-IP LPR-DL, User Manual, Page: 68 / 122

Share
Download
GeoVision GV-IP LPR-DL User Manual Download Page 68

 

58 

 

Font Size: 

Select the font size using the dropdown list. 

 

Date: 

Displays the date.

 

 

System Time: 

Displays the local time of the camera.

 

 

Select a position for each of the information to be displayed on the video image, from 

Upper Left

, 

Upper Right

, 

Lower Left

 and 

Lower Right

.

 

[Text Overlay OCX]

 

 

The Text Overlay OCX function allows you to overlay any text in any place on the live and 
recorded videos. Up to 16 text messages can be created. 
 
1.  To create overlay text, select 

Enable

 and click on the image. This dialog box appears.     

 

2.  Type the desired text and click 

OK

. Then drag the overlaid text to any place on the image.   

3. Click 

Save

 to apply the settings, or click 

Load

 (Undo) to revert to the last saved setting. 

4. Optionally click 

Preview

 to see how the texts will appear on the image. 

 

[Watermark Setting] 

 

Enable this option to watermark all recordings. The watermark allows you to verify whether 
the video has been tampered with. See 

4.4 Verifying Watermark

. 

 
 

Summary of Contents for GV-IP LPR-DL



























































































































Reviews:

No comments