Administrator Mode
61
3
3.5 Events and Alerts
This section covers the event and alert settings of the camera, including
I/O Settings
,
Tampering Alarm
and
LPR Settings
.
3.5.1 Input Settings
[Digital Input 1/2]
Before configuring, make sure the desired input device has been properly
connected to the digital input of the camera, see
1.6.2 External Wiring
.
To activate the sensor input, select
Enable
.
Normal State:
You can set the input state to trigger actions by selecting
Open Circuit
(N/O)
or
Grounded Circuit (N/C)
.
Latch Mode:
Enable this option to have a momentary output alarm.
Trigger digital output relay:
When this option is enabled, the output will be triggered
once the input is activated.
Trigger Day/Night Mode:
Enable to switch between day/night mode when the input is
triggered.
Send Video to Center V2:
Enable this option to send the images to Center V2 when the
input is triggered.
Note:
For input triggers to work, I/O monitoring must be enabled, either manually or by
schedule. See
3.7 Monitoring
and
3.5.3 I/O Schedule
for details.