manualshive.com logo in svg

GeoVision GV-IP LPR-DL, User Manual, Page: 75 / 122

Share
Download
GeoVision GV-IP LPR-DL User Manual Download Page 75

 

Administrator Mode

 

 

65 

3

3.5.5   LPR 

This section covers the LPR-related settings of the camera. 
 

3.5.5.1  Recognition Result 

This function allows you to display the recognized plate number capture, along with the date 
and time of the recognition, and/or a desired text on the images of the recognition results. 
 

 

 

Overlay Text on Recognition Results: 

Includes a desired text or description on the 

images of the recognition results.

 

 

Overlay Time on Recognitions Results: 

Includes date and time stamps on the images 

of the recognition results.

 

 

Overlay LPR Result on Recognition Results: 

Includes the recognized plate number on 

the images of the recognition results.

 

 

Overlay Text Position: 

Select a position for which to display the overlay texts on the 

images of the recognition results.

 

 

Snapshot Size: 

Select the size of the recognition event snapshots, between 

Small

 and 

Original

.

 

 

JPEG Quality: 

Select the quality of the snapshot, from 50 ~ 80%.

 

 
 
 

 

Summary of Contents for GV-IP LPR-DL



























































































































Reviews:

No comments