36
Date and Time on IPCAM
Displays the current date and time of the camera.
Time Zone:
Sets the time zone of the camera.
Time Synchronization by:
Select one of the following to synchronize the camera’s date
and time by.
Synchronize with Network Time Server (NTP):
By default, the camera uses
to automatically update its internal clock every 24 hours.
You can change the host name or IP setting to the timeserver of interest.
Synchronize with the local PC or modify manually:
Select to manually set the date
and time of the camera or synchronize with the time of the PC.
[Daylight Saving]
Select
Enable Daylight Saving Time
to automatically adjust the camera
for daylight saving.
DST Setting By:
Select
Time
to specify a
Start
and
End Time
to enable the daylight
saving. Or select
Week
to set specific days of certain weeks as the Start and End Time.
[Language]
Change the language of the Web interface.
[LED]
The
Ready LED
is enabled by default. Optionally disable the Ready LED of the camera
if necessary.
[About]
Displays the open source licenses, if any, used by the firmware.