62
3.5.2 Output Settings
[Digital Output 1 – Normal State]
Before configuring, make sure the desired output device,
e.g. the required gate or barrier for access control, has been properly connected to Output 1
of the camera, see
1.6.2 External Wiring
.
Output Mode:
Choose the output mode that mostly suits your scenario, from
General
,
Toggle
or
Pulse Mode
.
General Mode:
Triggers the output once.
Toggle Mode:
The output continues to be triggered until a new input trigger ends the
output.
Pulse Mode:
The output is triggered for the amount of time you specify in the
Trigger
Pulse Mode for x Seconds
field.
Output State:
Choose the output signal that mostly suits the device you are using:
Open
Circuit (N/O)
or
Grounded Circuit (N/C)
.