AKULA 9000B USER MANUAL
/ SECTION 1
REV:EN05130513-03
Copyright 2006-2015 © Geoscanners AB
8
1.2
Connecting The Antenna
• Connect the end of the control cable with the green connector
to the antenna. Please note that this connector has a specific
position to be inserted. Find that position first.
• Turn the bayonet mechanism to secure the connector in place.
• Connect the other end of the control cable with the silver
connector to the control unit main input. Please note that like in
the previous case this connector also has a specific position to
be inserted. Do not force the connector into place.
• Turn the bayonet mechanism to secure the connector in place.
• If you have a survey wheel cable then connect it now to the
survey wheel cable input of your control unit.
• Please note that this survey wheel input is known to the
software as the internal one. This is important for calibration
purposes and for surveys in distance mode.
• It might be the case that you need to attach the survey wheel
cable directly to the antenna.
• In this situation the internal survey wheel cable is not in use and
should be disabled in the control software.
• Geoscanners AB survey wheel encoders are protected against
double connections. However, third party survey wheel encoders
might not. Do not connect two survey wheel encoders
simultaneously if you are not sure.
1. Connect the antenna
2. Connect the control unit
3. Internal survey wheel cable
4. External survey wheel cable
