AKULA 9000B USER MANUAL
/ SECTION 2
REV:EN05130513-03
Copyright 2006-2015 © Geoscanners AB
12
• Now that all the setting are correct for the selected antenna
it is time to start collecting the data. For this basic setup we
will be using time mode which is the default when loading
an antenna model from the quick setup drop down box.
• Press now the record mode button in the main toolbar to
enter the record operating mode. The same can be achieved
by pressing Ctrl+D keys on your keyboard.
• Press the record button in the main toolbar to start
collecting the data in time mode. Alternatively you can press
Ctrl+R keys on your keyboard.
• The data should start filling up the screen and moving the
antenna over some buried object will produce signatures in
the data that will be analyzed later on.
• To stop collecting the data press the button next to the start
record button which is enable only while recording the data.
Your data is now available in the default directory. See
Global Settings for more details.
• At Geoscanners AB we are proud to provide the best
customer support in the industry.
• To allow us to be able to help you efficiently please always
provide the model number, serial number and firmware
revision of your unit.
• This information is found under the help menu in the about
tab.
4. Entering Record Mode.
5. Collecting the Data
6. Getting Help
