88 fu-processx-en
www.georgin.com
Instruction manual - ProcessX
for display
11
19
H-2: LINEARIZE
H-3: LINEARIZE
CHANGE
20
H-3: LINEARIZE
Set Output Mode
LIN-LIN or SQR-SQR
21
< 1 > INVALID
CHNG OK? < ENT/CL >
INC
2
3
4
5
1
CL
2
< 2 > EFFECTIVE
< 1 > < 2 > < CL >
< CL >
CHNG
CHNG
CHNG
CHNG
CL
CL
CL
CL
CL
CL
CL
CL
6
CL
CL
ENT
INC
1
2
INC
ENT
INC
Next
parameter
15
INC
INC
INC
16
9
15
16
7
CL
H: LINEARIZE
< INC > < CHNG >
INVALID
H-1: LINEARIZE
< INC > < CHNG > < CL >
INVALID
EFFECTIVE
H-2: LINEARIZE
< INC > < CHNG > < CL >
POINT 0
H-2: LINEARIZE
< INC > < CHNG > < CL >
POINT XX
H-3: LINEARIZE
< ENT > < CL >
POINT 0
H-3: LINEARIZE
< 1 > < 2 > < CL >
< 2 >Comp value:CV
< 1 >Lin. point:LP
H-4: LINEARIZE
< INC > < CNG/ENT/CL >
LP1 XXX.XX%
H-4: LINEARIZE
< INC > < CNG/ENT/CL >
LP3 XXX.XX%
for display
for display
15
INC
7
16
10
15
I : Rerange
16
8
H-4: LINEARIZE
< INC > < CNG/ENT/CL >
LP2 XXX.XX%
H-4: LINEARIZE
< INC > < CNG/ENT/CL >
LP14 XXX.XX%
CHANGE
Input the value of
point and press
ENT (POINT XX)
In the case
where POINT
XX has been
set
For DP
CL
LP1
LP2
LP3
LP14
INC
DEC
Change of compensated
point for LP
0HQX+/LQHDUL]DWLRQIXQFWLRQ
The linearization function is used for level measure-
ment in open or closed tank.
This function can be used only if the tank shape can-
QRWKDYHOLQHDUOLQNEHWZHHQWKHOHYHODQGWKHÀXLGIRU
example : spherical tank or horizontal cylindric tank...)
14 compensation points are available corresponding
to 15 line segments, (X
1
, Y
1
), (X
2
, Y
2
)…(X
14
, Y
14
). Each
compensation value between (Xn, Yn) and (Xn+1,
<QLVFRQQHFWHGE\¿UVWRUGHUDSSUR[LPDWHIRUPXOD
.
Functions for LINEARIZE are available for FXW Ver-
sion 6.0 and upward.
%\ SUHVVLQJ ,1&! DW GLVSOD\ RI
d
, the display is
shifted to the setting of LINEARIZE POINT
e
.
3UHVV &+1*! DW GLVSOD\ RI
e
and input POINT
;;WREHFRPSHQVDWHG7KHQSUHVV(17!DQGWKH
display will be shifted to
g
.
3UHVV,1&!DWGLVSOD\RI
g
and the display will be
VKLIWHG WR \ IRU VHOHFWLRQ RI ! /LQ SRLQW /3 DQG
!&RPSYDOXH&9
6HOHFW!/LQSRLQW/3DWGLVSOD\RIDQGLQSXW
XXX.XX% to each point (LP1-LP
).
At the completion of input to all the compensated
points, press ENT twice and the write of LP will be
¿QLVKHG
At this time, the display is shifted to
h
.
6HOHFW!&RPSSRLQW&9DWGLVSOD\RI
h
and in-
put XXX.XX% to each point (CV1-CV
) in the same
ZD\DVQRWHGLQ!/3
At the completion of input to all the compensated
points, press ENT twice and the write of CV will be
¿QLVKHG
At the completion of write of compensated program
for LP/CV, press CL twice at the display of
h
for
shifting to
d
.
7KHQSUHVV&+1*IRUVHOHFWLRQRI!,19$/,'DQG
!())(&7,9(RI
. At display of
SUHVV!
and the display will be changed to EFFECTIVE.
1RWH,QWKHNH\VWURNHIRU/LQHDUL]DWLRQSOHDVH
VHWHDFKSDUDPHWHULQWKHEHORZVHTXHQFH
1.
Set the number of compensation points in the
range of 2 to 14.
2.
Set each linearization option point (LP*) cor-
rectly, and write them.
3.
Set each compensation value (CV*) cor-
rectly, and write them.
4.
Set linearization option into EFFECTIVE and
write.
