18 fu-processx-en
www.georgin.com
Instruction manual - ProcessX
3.2 Process piping
'LIIHUHQWLDOSUHVVXUHDQGÀRZWUDQVPLWWHUVW\SH).&
&KHFNRIKLJKDQGORZSUHVVXUHVLGHVRIWUDQVPLWWHU
7KH +LJK 3UHVVXUH VLGH LV LQGLFDWHG E\
H
" and the "Low"
pressure side by "
/
" on the cell neck
5HPRYDOWKHSURWHFWLYHFDS
The process connection ports of the transmitter and manifold
YDOYHDUH¿WWHGZLWKSURWHFWLYHFDSV%HIRUHSLSLQJEHVXUHWR
remove the caps. When removing the caps, carefully protect the
threaded portion and sealing face from damage.
&RQQHFWWKHWUDQVPLWWHUWRLPSXOVHSLSHV
:KHQXVLQJWKHPDQLIROGYDOYHLWVKRXOGEH¿[HGWRWKHWUDQVPLWWHUE\WLJKWHQLQJIRXU
RYDOÀDQJHVHWEROWV81)DQGWKHQWKHLPSXOVHSLSHVKRXOGEHFRQQHFWHGWR
the manifold valve. Tightening torque of 7/16-20UNF mounting bolt should be 30 to 40
Nm (3 to 4 kgf m).
(2) If a manifold is not used, the impulse pipes can directly be screwed into the transmitter.
,IWKUHDGVL]HGRHVQRWPDWFKEHWZHHQWKHWUDQVPLWWHUDQGLPSXOVHSLSHVDQRYDOÀDQJH
VKRXOGEHXVHG7LJKWHQLQJWRUTXHRI81)PRXQWLQJEROWLQDQRYDOÀDQJHVKRXOG
be 30 to 40 Nm (3 to 4 kgf m).
The piping connection must respect some rules to have an accurate measurement :
General recognitions are :
1) Transmitter must be mounted below the process piping for liquid and steam measurement.
2) Transmitter must be mounted above the process piping for gaz measurement.
Main valve or manifold used for piping should be selected with the maxi-
mum pressure of the process taken into account (piping parts such as
main valve, etc. should be furnished by user). If the main valve and other
parts do not meet the rating, it may result in leakage of gas or liquid which
could lead to a hazard.
ATTENTION
L
H
4HREADEDPORTION
3EALSURFACE
