fu-processx-en 3
www.georgin.com
Instruction manual - ProcessX
CAUTION
:
Rotating the upper assembly part :
The upper assembly (housing and electronic unit) can be rotated by 90° left or right just by removing
the 3 hexagonal screws.
If the assembly parts must be turned over than 90°, or if the position
is already amended since the delivery by Georgin, it's necessary
to remove the electronic unit from the housing and disconnect
the flatcable from the electronic measuring cell before turn the
housing.
If necessary, amend the flatcable's position connecting electronic
unit and measuring cell, after fit the different parts.
Failure to observe this may lead to the deterioration of the flat
cable, which is not covered by the manufacturer's warranty.
