Georges Renault CVIS II, Operator'S Manual

Page: 9 / 76

6159932410-02
English
9 / 76
DESCRIPTION AND OPERATION
SECTION 2 - DESCRIPTION AND OPERATION
1 - GENERAL
The CVIS II controller can control 1 portable ER type and/or fixed EM type electric power tool. It is supplied ready to operate.
The default settings meet a large number of applications.
The CVIS II includes one station. In general, the station name is the name of the application.
1.1 - Tightening and untightening strategies
Tightening types: Torque, Angle, Angle+Torque, Prevailing Torque.
Untightening types: Torque, Angle, Angle+Torque.
Optional: current monitoring.
1.2 - Number of cycles and phases
The system allows you to perform 15 tightening cycles of 8 phases each .
The cycles are numbered from 1 to 15.
-
4 quick cycles (rundown speed/final speed) are pre-programmed in the controller. Torque and/or angle settings are to be
updated before use.
1.3 - Memory size :
Up to 3 000 tightening results according to the number of cycles.
1.4 - Number of curves
2 curves are stored: the last "correct" curve and the last "reject" curve. The curves are not displayed on the controller screen, but
they can be seen using the CVIPC 2000 software.
2 - OVERVIEW
Valid
Esc
OK
MIN
MAX MAX
OK
MIN
CVIS II
α
Keyboard/display
Door locking system
On/Off switch