Georges Renault CVIS II, Operator'S Manual

Page: 60 / 76

6159932410-02
English
60 / 76
PRINTING FORMATS FOR RESULTS
5 - PC5-B FORMAT
xx
torque rate (ASCII notation)
e.g.:0.900 Nm/°
30 30 39 30 30
xx
xx
xx
xx
FF end of frame character
Report per spindle: torque, angle, torque rate:
F0 start of frame character
01
xx report (in hexadecimal notation):
02
xx 00
03 TT torque report
xx AA angle report in binary notation
04 TR torque rate report
xx where TR, AA or TT =01 if low report
05 11 if accept report
xx 10 if high report
06
00
on servodrive fault
xx spindle belonging to reject group
07 cycle start drop
xx cycle not completed for spindle
08 transducer fault
e.g.:if accept report for all the spindles
F0 01 3F 02 3F 03 3F 04 3F 05 3F 06 3F 07 3F 08 3F
Available parameters programmed for 1 spindle (x times the number of spindles):
01 spindle number in BCD
xx
minimum torque in 1/10th of Nm (ASCII notation)
e.g.: 90.0 Nm
30 30 39 30 30
xx
xx
xx
xx