Georges Renault CVIS II, Operator'S Manual

Page: 57 / 76

6159932410-02
English
57 / 76
PRINTING FORMATS FOR RESULTS
3 - PC4 FORMAT
Title
Names of the columns of the lines of results (depending on the language) and measuring unit on a 2nd line:
Result
In "Print at end of cycle" mode, the reading number is replaced by blanks.
If one of the values is missing in the unit (eg: torque rate), it is replaced by blanks.
Example of result: <CR>1223 02 03 00 18/04/03 09:03:45 0030.2 0120.5 0.5680 B <LF>
Report code : The codes emitted on letters are used for digital report outputs or printouts. All these codes correspond to specific
displays. The table below shows the corresponding codes displayed. On the contrary, if some messages on the screen do not
correspond to a letter, it means that they are not emitted.
Rdg N° Sp Cy Ph Date Time Torque Angle Torque
rate
Stanby
characters
CR
Nm dg Nm/dg
xxxx xx xx xx xx/xx/xx xx:xx:xx xxxxxx xxxxxx xxxxxx xxxxxx xxx
1 char. <CR>
4 Reading number
1 “ “
2 Spindle number
1 “ “
2 Cycle number
1 “ “
2 Phase number (= 2 blanks if cycle result)
1 “ “
8 Date in DD/MM/YY format
1 “ “
8 Time in hh:mm:ss format
2 “ “
6 Torque
2 “ “
6 Angle
2 “ “
6 Torque rate
2 “ “
6 Stanby characters
2 “ “
3 Report code in 3 letters
1 <LF>